25 Responses to “Home built electricity magnet generator alternator turbine hard drives”

1. 
   fishcake1235 Says:
   16. February 2010 at 12:58 pm

   Awesome dude, Keep it up, thanks for vid

2. 
   hboy007 Says:
   23. February 2010 at 11:29 am

   stop at 0:34 and check out the wires that go from above and are taped to the table. Sill so convinced it’s a fake?

3. 
   bogdy72000 Says:
   24. February 2010 at 3:11 pm

   hype and tight dude

4. 
   angrygunsmith Says:
   25. February 2010 at 8:16 am

   how can this be used consistently, with a constant output?

5. 
   TheGoatweasel Says:
   25. February 2010 at 3:55 pm

   all I will sayh is this… soooo many “scientist/inventors” are “claiming” generators40% overunity 100% overunity free energy bla de fucking bla…. so oil wont be needed in the next 2 years..funny how none are in production.if they work u should have people throwing money at you with one working prototype…bull shitters…fuckingtime wasters..

6. 
   snotboxxx Says:
   25. February 2010 at 9:31 pm

   Looks sane. I see no reason why this shouldnt work or be fake. Also, i believe the “magic multimeter” is simply attached to the bottom of the plate (since thats where the motor connectors are) and thus run around the table to the left to do so.

7. 
   BRILLOPADral Says:
   26. February 2010 at 2:40 pm

   you are so silly to ask that, do your research and dont fret it till you get it!!! Keep up the exellent work clean republic!!!

8. 
   mijdtr Says:
   27. February 2010 at 3:45 pm

   good job my friend cheers to you. recycling, green power, all combined. the best, purest, form of conservation. most cost effective form of recycling, along with one of the purist forms of of electric generation.

   thank you.

9. 
   funkymuva Says:
   27. February 2010 at 7:46 pm

   Nice dude. gonna get rippin some hdd’s open right now!

10. 
    MB4AC Says:
    27. February 2010 at 9:20 pm

    wow make sure Al Gore knows about this

11. 
    damiyanvx Says:
    27. February 2010 at 10:34 pm

    I meant, that it depends on amperage, not only voltage.

12. 
    sunnycheetah Says:
    28. February 2010 at 12:02 pm

    Ok, the problem with this is that harddisk magnets have their north and south poles on the sides so they work against each other. Buy magnets that have the north and south top and bottom and you have much more watts. I am planning to do this soon with a harddisk. TIP if you want a bigger disc on your motor, if you cut the center out of a cd (in the groove that goes inside the transparant center) it fits just right on a harddisk motor. Use one platter under the cd for strength.

13. 
    deltopo23 Says:
    7. March 2010 at 11:28 pm

    it works

14. 
    eyesonlyfd Says:
    11. March 2010 at 3:21 am

    I know what you mean, I hate that bad projects have big budgets and good ones have small budgets. Is not always that investors know where to invest nor have technical knowledge for it.

15. 
    eyesonlyfd Says:
    11. March 2010 at 3:31 am

    @damiyanvx
    He wrote that he achieved 15W in the video.

16. 
    rmassie11 Says:
    15. March 2010 at 5:43 am

    five stars for the music, haha

17. 
    cosay1 Says:
    15. March 2010 at 6:32 pm

    U THE MAN!!!!!!!!!!!!

18. 
    notarandomperson Says:
    18. March 2010 at 5:46 pm

    if the hdd was conected to a computer and spun at 1500prm would it generate more or less power than that needed to power the hdd?

19. 
    techguy3000 Says:
    24. March 2010 at 2:11 am

    Nice! Can you please tell me how you made it?

20. 
    dumle29 Says:
    27. March 2010 at 4:00 pm

    cant this run 5400 rpm or 7400 rpm?

21. 
    Jeenyus1983 Says:
    28. March 2010 at 12:22 am

    Gotta love the jam! Hammer time! Good video man! lovin that lil bit o style you threw in there too!

22. 
    henrykay01 Says:
    6. April 2010 at 3:28 pm

    I invented a breakthrough source of energy that contradicts the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena that contradict the law of conservation of energy. I am looking for $6M for a prototype and patents.
    H. Tomasz Grzybowski
    tel. +48-512-933-540

23. 
    reggie368 Says:
    8. April 2010 at 11:49 am

    I just discovered your video. And yes we waste too much things nowadays. I hope I could do the same like but I don’t any real technic skills for that… Still it deserves an “I like it” ! Keep it up ans show us more !

24. 
    fishtankbank Says:
    9. April 2010 at 2:57 pm

    looks smooth, nice. ive been whanting to do a miniture generator with the teeny magnets out of burners. i hit up staples dumpsters and get lucky.

25. 
    AdanRules66 Says:
    11. April 2010 at 9:06 am

    ahahaaha omg this is funny, theres 1 element that can make this 100% work and i know what it its:D

Leave a Reply