Magnet motor/generator Adams motor replication |

lykenth08 Says:
26. April 2009 at 11:09 am

they are kinda alike, iv only seen what others have produced on the ocilascopes?.. them things any way. its just the bedini can do it alot faster as it uses a semi conductor or transistor to switch on and off. prone to heat and surge damage, unlike a swich, but that can fuse shut depending on what it is made of/ how big.

abmz1970 Says:
3. May 2009 at 5:06 pm

I believe that everyting is possible now since we have the tools and knowleged to discover new ways of energy

TheGuru2You Says:
7. May 2009 at 3:41 am

The Adams pulse motor:
Magnets on the rotor are attracted to the metal / iorn of the coils centre. The Coil is pulsed very very weak only to naturalise the attraction of the rotor magnet to the metal core in that moment before back drag slows the movement of the rotor. This is repeated for every magnet on the rotor. All magnets have the North pole facing the coils. Movement power comes from the permanent magnets attraction to the iorn coils centre only!

MaleAdaptor Says:
28. June 2009 at 9:28 pm

Hello. Is the booklet that you where flicking through on the internet? I want to have a stab at making an adams motor. I understand Lutec is based on Adams motor. thx.

m3sca1 Says:
29. June 2009 at 2:58 am

the book only brief description-it is availabe tho-look for “The harmonic conquest of space”author Bruce L. Cathie.
detailed descriptions of construction notes can be found online too

BiDaDiKuNuKu Says:
8. July 2009 at 11:44 am

hi m8,

nice simple setup…:)
running on 20 Mamp is very efficient…:)
where can i get a daigram of this circuit?..ty

Peace!
V2DAY

m3sca1 Says:
8. July 2009 at 12:55 pm

i purchased instructions thru Nexus magazine many years ago,not sure if it is still available-info can be found online search for “robert adams magnet motor generator”.
Adams machine used a commutator-i went for reed switches becasue it was easier than building a commutator.
Adams didnt have a second rotor on the shaft which i have incorporated for the adding of other coils and the tighter radius of the smaller rotor gives good switching when used with reed switches.
feel free to PM me!

BiDaDiKuNuKu Says:
8. July 2009 at 5:18 pm

thnx 4 ur replay…i`ve search and found plenty stuff on this Adams Motor…looks alot like Bedini/Newman and so on…:)
thnx 4 offering ur help 2…:D
but 4 now ima only reading about Tha Adams Motor…;-) got 2 focus on ma Window Type build 4 now.

Peace!
V2DAY

m3sca1 Says:
9. July 2009 at 6:55 am

a wise choice to stick with what you are tinkering with already-advice for others:
i think Adams advice on small neo’s or using ceramic magnets rather than large neo’s,is something that anyone considering building such a device should heed this advice-i see many attempts with large neodynium iron boron magnets,in this case bigger is not always better.

BiDaDiKuNuKu Says:
9. July 2009 at 12:43 pm

yep…u r right…1 got 2 stick with something even if it looks like 1 hit tha wall…sooner or later 1 will get thru that stage…:)….and yes Bigger isnt always better….i think tha keyword here is “BALLANCE”….:)

Peace!
V2DAY

PorSiempreElMetal Says:
26. July 2009 at 4:58 am

i dont understand all this about magnet blah blah. Everything about these things is the abc of electrical machines and drives. Go read books

m3sca1 Says:
26. July 2009 at 6:59 am

i do read books-its common knowledge that we dont fully understand magnetism and its relation to electricity-can the ABC of electrical machines answer why i get higher voltage when the generator coils are switched open circuit for a small percentage of the duty cycle-or the reduced eddy current drag forces that lead to higher speed of the rotor,becasue of this open circuit switching,or why i can charge a capacitor with only one wire?

x65535x Says:
12. August 2009 at 5:53 am

Well you have successfully created a horribly inefficient electric motor. As for the higher voltage, it has to do with the lack of loading on the coil as well as the moment where the rotor is at it’s highest rpm with no load on the “generator” coil creating a peak voltage.

DragonFlyback256 Says:
23. September 2009 at 6:17 am

Smaller magnets mean quicker timing. =)

Covey69 Says:
24. October 2009 at 2:14 am

I agree, I am seeing lots of people broaden their minds just working in theit own home labs. I think its wondeful you take the initiative to not only learn but teach us so as we can learn. I love these things and I envy your life to have that knowledge and those toys and the fun you must have exploring your own mind through others experience and wisdom.
Please doing what you do..
And thank you for taking the time to share.
I like to call you, The Sci Guy.
Watch ThaneCHeins#p/u/38/FmFbINO0dCU

blackle4ps3 Says:
6. December 2009 at 3:44 pm

possibly save some labor using, (smart drive) washing machine motors,on single shaft with offset keyways

blyaxamuxin Says:
29. December 2009 at 10:26 am

OMG

superwhiz88 Says:
8. January 2010 at 5:45 am

your massage are soooo true ,, you should say something about this cockroch desertphile azzhole..

valveman12 Says:
23. February 2010 at 4:38 pm

Seems to me that this has been tried several thousand times with the same unremarkable results. I would think by now if this technology actualy had a practical purpose, we would see it being used already. I’m not knocking anyone for experimenting, but when are we going to see actual practical results. i.e. new tech being used for modern transport.

LiamXaoh Says:
6. April 2010 at 7:05 am

Folks buy a set of plans with details of a motor with some person’s name (Bendini, Newman, Adams) on the basis that it is some remarkable device. What I see is electric motors that require an external power source. Magnets and coils working like any other motor ever made. Unless they produce free energy they are unremarkable porridge. They don’t so…

henrykay01 Says:
10. May 2010 at 5:37 pm

I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena that violate the law of energy conservation. I am looking for $6M for a prototype and patents.
H. Tomasz Grzybowski
tel. +48-512-933-540

ChristopheBeau Says:
18. June 2010 at 12:06 am

So if you were to hook up a generator on the axle would you be able to stay in positive territory? Then one would just have to scale the system up? How about starting the device, does it need an impulse of any kind?
Very interesting though.
Keep up the good work.

m3sca1 Says:
18. June 2010 at 1:14 pm

@ChristopheBeau i have tried it with the generator coils hooked to a capacitor and the same capacitor hooked to the run coils(no battery)-at best it winds down very fast so output is less than input-yes it needs an impulse to start-just to get it into the firing position of the reed-if the rotor is in the right position it will auto start,but the configuration of the magnets is such that wont sit in the firing sweet spot naturally.
thanx for your comment

ChristopheBeau Says:
19. June 2010 at 2:59 am

@m3sca1 Thanks for the reply. I didn’t thing that output would have been more than input…as that would have been world news.

alexvetryak Says:
22. June 2010 at 1:22 pm

Dear Sirs, we are doing the same as you. Our results can be viewed on our website. vetryak.com.ua