This is a very crude recreation of a device created by Bruce Depalma, which he called the “N” Machine. He claimed that the machine could create over unity electrical energy in a ratio of 5 to 1. That is to say, that the device created 5 times more electricity than was needed to run it. Here is a good explaination of how the device works. depalma.pair.com Michael Faraday created this experiment back in 1831, but it is unclear if he discovered that it is capable of over unity energy production. Faraday believed that the magnetic field remained stationary and locked in space, while the magnet and coil revolted around it and by the classical definition, the coil cuts magnetic lines of force and thus, creates electricity. The truth however is a little more complicated. The device is really just a magnetized gyroscope. A magnetic field is made of two vortex’s of spinning etheric energy. The special coil catches one of those vortex’s perfectly, and is able to access the magnetic field directly, which is of course a perpetual motion of energy. So the coil taps the energy from the magnetic field directly, and is able to draw off infinite amounts of energy, because the magnetic field compensates for energy lose all on its own. A magnetic field can create infinite amounts of energy out of thin air. To understand how this is possible, one needs to understand the true physics. String theory is completely wrong. That idea is something mathematicians created which has little connection …
29. November 2008 at 6:12 am
disturbedone5009 The conservation of energy theory is incorrect. Energy can be created out of nothing. People fail to understand what exists in empty space. Ether exists everywhere and it is what all energy is made out of and comes from. The truth physics has been suppressed and hidden for a very long time. Tesla created a free energy device in 1886 and yet, well over 100 years later most people havent heard of this.
29. November 2008 at 6:16 am
Adam Trombly has built free energy machines based upon a very similar concept.
29. November 2008 at 6:17 am
His site is project – earth – dot – com.
29. November 2008 at 6:18 am
He worked with another man named John Star who I have spoken with a great deal.
30. November 2008 at 1:00 pm
true but Ether cannot be measured or used simply because it is everywhere and you cant find a point of low potential of Ether. That`s why we cant make E from nothing practically. In theory we can.
2. December 2008 at 9:36 pm
It is my understanding that both Faraday and De Palma recongnized that the power load was not transfered back to the generator as negative torque, but instead as the generator is loaded the output is reduced. This principle is based on fixed field theory. You can see the fixed field using a magnet and an old working CRT. Point a pole face parallel to the CRT glass and rotate it on magnetic axis. You will notice that the pattern on the screen does not rotate with the magnet.
2. December 2008 at 9:48 pm
Adding coils helps, but De Palma understood the gain advantage of increasing diameter. IIRC, the increase is to the order of the 4th power while the load is only increased to the square. IOW, the bigger the diameter the better the performance. So a large flat disc would perform better than a narrow long coil of the same copper content. Then stacking the plate magnet combinations increases overall production. The secret is in the wet brushes. Use very low cohesive conductive fluid. gases=fluid
3. December 2008 at 12:49 am
AdminOnDuty, Ah, thank you for that! I see youve already seen for yourself this phenomenon of a magnetic field that operates independent of the iron that holds it. Please take a look at my video of the Improved Magnetic Vortex Electrical Generator. I havent been able to get it to produce much electricity yet. I have also modified it by attaching a special copper disc to it which I have a picture of at my website at the very bottom of the inventions page. So what am I doing wrong?
3. December 2008 at 12:55 am
I have 2 pancake coils almost 3 inches across attached to the permanent magnet and with about 12 meters of copper wire in it. I also have the spiral copper disc I built attached to the coil, and I am using the copper pick up arms (brushes) of a couple of small electric motors. I even fed the voltage produced threw a transformer in hopes that I could read a higher voltage with my meter, but to no avail. Is my meter not sensitive enough? I am so close, but Im missing something. Can you help me?
1. January 2009 at 5:48 pm
N-Machines don´t work.
They are just inducing the current inside the pickup wire…
Come to overunityDOTcom to find better principles.
Regards, Stefan.
3. January 2009 at 12:24 am
Adam Trombly built a working free energy machine based upon a similar concept as Bruce Depalmas N – Machine, as far as I know.
6. January 2009 at 3:27 pm
The research I have seen and agree with is that heat = energy. Applying a magnetic field to metal then dropping the field and repeating causes push pull on the metal – friction – heat. Thus energy is lost due to heat. I have seen (google) but not tried a black powder that can be obtained by sifting sandy soil over a magnet.
The black powder is made cohesive via an epoxy and is then used to concentrate the electromagnetic fields with out heating. No energy loss due to heat. Hope my 2cents helps.
19. June 2009 at 5:00 am
I think the coils of wire need to cut the magnetic field lines at right angles, also try it with a brushless motor they have a lot less friction and “noise” remember the voltage you will be getting will be an AC signal essentially, the length of wire is not important it is the number of turns on the coil…. hope this helps
30. June 2009 at 8:21 pm
I like your style and work, you definitely seem to understand what’s going on. Check out my videos if you find time
9. November 2009 at 12:48 pm
@ greenlivingitup . com it shows how to build a free energy device with magnets
6. December 2009 at 3:47 pm
Do you have a brother or know someone named Nick?
6. December 2009 at 9:05 pm
NO
8. December 2009 at 2:54 pm
…Serious?
8. December 2009 at 4:41 pm
lol YES!
14. January 2010 at 5:26 pm
What you are describing is very low grade iron ferrite. Get some decent stuff pre-formed from any electronics supplier, used for choke cores, transformer cores, a pretty much anywhere a magnetic field needs to be altered. This is 100+ year old technology.
19. January 2010 at 10:40 pm
everyone look up the ‘STEORN’ motor on display in dublin prooving overunity with replications shwoing the no cemf on the rotor !!!!
also look up the ‘rodin coil’ !!
THANKS FOR THE VIDEO , KEEP GOING !
17. February 2010 at 12:53 am
A guy makes a video of a motor spinning with a volt meter that he does not measure any thing with and all of you think he has created over unity. Bravo thats a new level of stupidity. Hey every one apparently all you need to generate electricity is to turn on a motor.
2. March 2010 at 3:14 am
And the point of that video was what?
2. April 2010 at 3:49 pm
Wow, that’s amazing. Hook a few of these in series and power the whole world. Or, hook it to itself and watch it blow itself apart–that would be interesting.
7. April 2010 at 9:38 pm
You suck!!!!!!!!!!!!!!!!!